Here’s a quick technique on wrapping around raised objects on your vehicle.
Step 1: Form the Yellotools Wrapbend-It wire around the raised object. Finish by twisting together both bend of the wire. You will use this as a stencil on your vinyl wrap.
Step 2: Trace the stencil on the vinyl wrap, and then make your cut 1/8″ inside of the stencil.
Step 3: Apply masking tape around the raised object on the vehicle.
Step 4: Position and then tack the graphic on the rear of the raised object. Add relief cuts where necessary.
Step 5: Trim along your traced line and remove excess vinyl. Install the remaining vinyl on the roof of your vehicle.